LaserCEM® the new generation of CEM’s analyzers

Highly sensitive and selective
Low maintenance and utilities costs
No drift nor cross interferences

Vous êtes ici

Application note CEM’s analyzers

Suivez ce lien pour voir toutes

Nos applications

What are CEM’s and why is it needed?

A continuous emission monitoring system (CEM’s) is the analytical equipment necessary for the determination of a gas concentration or emission rate of pollutants.

Around the world, CEM’s are required under local regulations for either continual compliance determinations or determination of exceedances of the standards (EN 15267 in EU, EPA in USA, etc.). Industrials use CEM’s gas analyzers to prove their compliance to emission regulations to environmental control authorities.

These online gas analyzers are used in industries with sensitive exhaust such as power plants, cementeries, refineries, incinerators, boilers, etc.

Technologies

LaserCEM® technology

The LaserCEM® uses the patented OFCEAS technology, based on extractive absorption spectroscopy. This laser based technology is able to measure gases from percentage to ppb concentration ranges, with an unforeseen quality of measurement in terms of accuracy and resolution.

The LaserCEM® samples the gas at low pressure. This dilution reduces the particles content and the dew point in the sampling line.

With LaserCEM® filters replacement is drastically reduced and heating of 180°c is avoided. Finally, LaserCEM® has an integrated auto calibration of the measurement system, preventing from drift under normal use of the instrument.

Therefore LaserCEM® is able to analyze all kind of gases and concentration ranges, with limited services and maintenance costs.

Key features

Highly sensitive – Low detection level (ppb)
Highly selective
Traced line – 40°C
Complete pre-calibrated laser infra-red spectrometer
No Zero drift and no Span drift – No daily calibration required
No nitrogen, zero air, purge or other carrier gas
Ppb to % measurement
Multigas analyser (NO, SO2, CO, HCl, CO2, NH3, H20, 02, C02, NO2, HF)

Installation

Analytical specifications

LaserCEM®

is a complete pre-calibrated multi-component (NO, SO2, CO, HCl, CO2, NH3, H20, 02, C02, NO2, HF) laser infrared spectrometer for CEM’s analysis.

ANALYTICAL SPECIFICATIONS
Gas Rangea LODb
 NO 0-80 mg/m3 0,1
SO2 0-75 mg/m3 0,5
CO 0-75 mg/m3 0,2
HCL 0-15 mg/m3 0,01
NH3 0-15 mg/m3 0,05
H2O 0-60 % Vol 0,1 %
O2 0-25 % Vol 0,05 %
CO2 0-20 % Vol 0,5 %
NO2 0-50 mg/m3 0,2
HF 0-10 mg/m3 0,01

a adjustable range on request
b limit of detection 3 sigma

Vous êtes ici

Application note CEM’s analyzers

Suivez ce lien pour voir toutes

Nos applications